At the outset it should be noted that the product relates to a suspended ceiling. Suspended
ceiling designs made of metal can be used in indoor public buildings as well as in individual housing.
ALL THE ADVANTAGES OF METAL CEILINGS
For designers and architects of metal ceiling designs is of undoubted interest a huge variety of shapes and color palette. Particularly important in this case is that this product is in addition to the aesthetic function is also very functional.
Metal ceiling is made of a thin aluminum or steel, with different decorative coating. This can be metallized layer or it can be put glossy or matte paint, as well as polymeric coating. Any metal ceiling designs have distinctive features such as:
- Durability
- Beauty
- Fire safety
- Hygiene
- Water Resistance
Like most suspension systems, suspended ceiling consists of separate modules of different configurations and shapes.
They can be:
- Quill
- Smooth
- With or without a pattern
Expert Advice - metal ceiling designs are not acoustic material.
THE METAL CEILING RIGHT CHOICE - YOU SHOULD PAY YOUR ATTENTION
Choosing a ceiling of metal panels should pay attention not only to its appearance, but also to take into account in which it will be used indoors.
If you need a good sound, you can select the suspended ceiling consisting of perforated panels.
- You can apply special mineral coating or coating of fiberglass. Coverage is pasted on the back side panels, improving their insulation.
Earlier we mentioned that the individual modules are available in the form of wide or narrow panels are cassette modules and cellular type.
OPEN OR CLOSED METAL CEILING DESIGN - THE CHOICE IS YOURS
 |
| an open metal ceiling design |
Another important feature of this coating is that the metal
ceiling designs can be obtained upon request. In this case, the ceiling suspension system may be configured as a closed and open form.
FEATURES OF THE BUILDING AND INSTALLATION - MAKE THE RIGHT CHOICE
Installation of metal ceiling designs vary widely:
If, for example, cassette ceilings are installed using conventional systems, the ceiling of a metal rack (rack and pinion) uses special designed for this test design.
This fact speaks primarily about that though Metal suspended ceilings and are considered similar to each other, but when you are installing and installation, they can be completely different systems.
This fact must also be taken into account when choosing a ceiling, which in its all is as complex and very comfortable.
Indeed device separate buildings and facilities may differ significantly from each other, so the system is not suitable for attachment of a building can be used successfully in another in which it is impossible to apply something else.
 |
| rack ceiling, a type of metal ceiling designs |
Next we want to tell a few details about the data ceiling systems. Pinion ceilings have another name - linear. From the name itself it is clear that they are going out of the narrow, individual panels.
layperson may seem that these ceilings are the easiest option device ceiling. This perfect misleading.
METAL CEILING DESIGNS-GREAT OPPORTUNITIES
 |
| strip ceiling, a metal ceiling type |
Despite the seeming simplicity, using strip metal ceiling can be mounted ceiling consistent with the most daring ideas dizaynera.Vazhno understand that individual panels are available in a very wide range of sizes, shapes and colors.
Many may wonder - and how you can combine in one ceiling panel completely different type? question is understandable and has a right to exist.
fact that currently there are fastening systems, which can be called universal. They are designed specifically for such options and allow you to set your own hands simultaneously on a single metal ceiling rack panels completely different type.
- All the matter in particular guides, thus creating a completely unique ceiling shapes and colors.
- Choosing one or another type of ceiling coverings, due to ignorance of people sometimes refuse to use in its interior materials selected by and large totally unreasonable.
Suspended ceilings so many associated with the flat surface. absolute fallacy:
- Using this system, you can perform a ceiling covering as completely flat and curved. It's enough to buy a curved panel.
Our reference - available for sale separate rack panels bent at different radius and angle.
Combining them, we can satisfy the most complex forms
HORIZONTAL METAL CEILING , VERTICAL METAL CEILING - ALL ACCORDING TO YOUR TASTE
 |
| metal ceiling installation as a wave |
But that's not all. The use of panels of has different configurations and colors may be not only a horizontal but also vertical and at various angles, including river panel can be installed with a radial divergence.
special use, hides or insertions internal junction panel, visual effect of achieving a solid element.
METAL CEILING INSTALLATION ON THE STREET - YOU NEED TO KNOW
 |
| outdoor metal ceiling installation, strips ceiling is one of metal ceiling types |
As previously mentioned, the metal ceilings may be installed in completely different areas and places, including on the street. You can successfully use them in various sheds and gazebos.
installing a rack system on the street it is important to understand that not every panel is suitable for this. No, of course you can install it, but if it lasts long?
For street involves the exposure of ceiling covering additional loads missing in the rooms. These include high humidity and wind, as well as other Natural phenomena made of metal thickness of 0.3 - 0.6 mm.
As becomes clear, thickness plays a major role , but not the most basic role:
- When selecting the metal ceiling panels, if you intend to use them on the street, you should pay attention to the geometry of the panel.
- The presence of additional stiffeners significantly increases their resilience to external shocks.
Our advice - acquiring rack panels, carefully read the documents. Pay particular attention to wind load resistance index. With the regulations can be found in SNIP 2 .01. 07 - 85.
- It is also necessary to correctly calculate the pitch of the profile. Otherwise, your ceiling is simply deformed after more mene a strong wind.
Bearing stringers are made of aluminum or steel.
METAL CEILING INSTALLATION FIRST STEP - THE MOST IMPORTANT
Installation manual prescribes that strip ceiling installation begins with the installation boundary .Uroven fastenings, is precisely the level at which the future and will be the ceiling. This is the most important stage of the metal ceiling installation, there are unacceptable errors . Violations will lead to distortions and complete alteration the whole structure. More detail about installing strip ceiling with his hands, it is written on the pages of our resource in a special section. There this topic are covered more extensively.
SIMPLICITY AND EFFICIENCY - A MAJOR FACTOR
What else is important to note, all metal ceiling designs produced by leading companies in the world are made in such a way that the assembly and disassembly of individual elements can be performed without the use of special tools and instruments.
Metal Ceiling panel type
Consider the metal ceiling panels details. Their is main difference from the above slatted, is used in size panels. They have a large width, and thus their folded edges on all four sides.
- With a width of 300 mm and length up to 6000 mm, this metal ceiling design can be installed using a big step attachment.
- This achieves significant savings on fasteners.
- If in small spaces, this circumstance does not play a significant role, in areas significant area savings can be quite large.
MATERIAL AND POSITION
As in the previous case, these panels can be mounted on the curved bearing.
- metal ceiling panels are made of steel and aluminum. Moreover, if the panel is made of steel, its thickness will be 0.6 mm and 0.7 mm of aluminum.
- This design is very well integrated with various lighting equipment.
MOUNT - TYPES AND METHODS
Currently, there are two types of compounds:
- Joint closed with an interval of 10 mm
- Closed joint possession of a V - bevel.
The elements are mounted also in two ways:
- Produced similar snap strip ceiling
- Fastening method for edge profiles.
There is another option, in which individual panels are mounted on hinges. This is a very convenient way, when there is need to control the overhead space.
- For example, do you have there are certain communication.
- In this case not necessary to remove the panel, simply open them with one end, a second end attached to the movable loop. Quite convenient.