Installation of 3D flooring murals is very difficult and responsible process and does not tolerate even the slightest error, so the best option would be to call a master. But if you, nevertheless, decided to install the chosen 3D floor design by yourself, you need to pay attention to some features.
 |
| 3D floors designs, self leveling 3D flooring, 3D floor graphics |
First you need to make a foundation for the 3D flooring. Most often, it is a screed concrete. the installation of the 3D floor art foundation should be so that there were no cracks, no bevels and the entire surface must be perfectly smooth.
The next step you need to completely clean the surface. On the floor, there shouldn't be even the tiniest of dust.
 |
| 3D floor designs patterns, 3D flooring ideas |
One of the most important stages in the installation of the 3D flooring, is to make sure that the floor humidity is minimal, otherwise, you just throw out of money because the top 3D floor murals will be covered with cracks.
If the basis of the pattern you have chosen is 3D floor mural, you need to check that, after bonding to the substrate was nowhere folds or creases. If you decide to perform a drawing with painting 3D floor art, then after drying, it is necessary to cover the primer design.
 |
| 3D floor design, bathroom flooring ideas |
Mixing the polymer with a curing agent you need a mixer, and in any case by hand.
Ready mix to fill the 3D flooring takes one hour. If the area of the room is very big, then you need to divide it into parts, each takes an hour for filling. You also need to take care of shoes, so as not to leave traces and fingerprints on the surface. The thickness of the polymer 3D flooring layer should not be more than 4-5 mm. It is not difficult, with the proviso that the surface is initially a perfectly flat.
 |
| 3D floor designs, self-leveling floor compound |
The structure of the 3D flooring polymer is aligned itself, but to create a perfectly smooth surface using special tools (roller or squeegee blade). They do not leave air bubbles.
It is necessary to clearly follow the time frames for each stage of the work.
The final stage - fill the 3D floor design with a protective varnish.
self leveling floor consists of a printed image, which is anchored to a concrete base and top coated with polymer liquid material. Such a self-leveling floor compound, that is, after the application of the polymer material, self-aligned to create, in the end, it is a solid, smooth and seamless surface with 3D floor art.
Like any other flooring, self-leveling floors with 3D graphics, there are both advantages and disadvantages. We consider these in more detail.
 |
| 3D self leveling floor compound, 3D flooring for living room |
The most significant advantages of 3D self leveling floor compound is that they do not have any swings which making maintenance and repair are not a big problem. In addition, these 3D floors do not accumulate dust and do not create a favorable environment for a variety of pathogens. All plastic materials used for 3D self-leveling floor are safe for human health and hygiene, which is mandatory, is confirmed by certificates. It is important also that such 3D floor murals is very resistant to high temperatures. In the case where a long time to cover the impact high temperature, such as in the event of fire, the self leveling flooring does not emit any toxic substances in the air.
It is also important that such self-leveling floors have a very high wear resistance, as well as the fact that for a long time they retain their original look and given color.
The high stability of such 3D floor art to shock and vibration, as well as to the effects of a wide variety of chemical compounds, allow them to be used successfully in the bathroom or in the kitchen. we will talk about the 3D bathroom floor below